This guide provides step-by-step instructions for cardiac technicians and doctors on how to analyse, review, and finalise Holter procedures within BeatBox using the Integrated Analysis Tool (IAT).

Note: For Enrolling and Uploading a Holter Procedure, refer to the Holter Enrolment and Holter Data Upload User Guides for detailed instructions on how to enrol a patient and upload a Holter recording to BeatBox.

1. Procedure Status – Ready for Analysis

Once the Holter procedure has been successfully uploaded and processed, its status will update to Ready for Analysis. At this point, the Analyse action will automatically become available in the worklist.

2. Launching the Analysis

To begin analysing the Holter recording:

• Click Analyse.
• BeatBox will launch the Analysis Tool automatically.

3. Performing the Analysis

The cardiac technician or doctor can perform the Holter analysis in the Analysis Tool according to standard clinical and reporting practices.

4. Saving or Reviewing the Analysis

• To save progress during the analysis, click Save in the Analysis Tool.
• You can return later to review, edit, or complete the analysis as required.

• To return to the worklist, click Close.

  Note: Ensure your analysis is saved before closing to avoid loss of progress.

5. Creating the Analysis Report

• Once the analysis is complete, click Create PDF to save the analysis and generate the report.
• This action will automatically update the procedure status in BeatBox from Ready for Analysis to Analysed.
• You will then be automatically redirected back to the worklist. 

6. Viewing the Analysed Report

• From the Worklist, click Report to open the Report View.
• Review the analysed report as needed.

7. Re-Analysing a Report

To re-analyse an existing report:

• In the Report View, click Re-Analyse from the ellipsis (⋯) menu.
• The procedure will open in the Analysis Tool for re-analysis.

8. Finalising the Report

After reviewing the analysis, the doctor or cardiac technician can click Confirm in the Report View to finalise and lock the report.

Optional Post-Finalisation Workflows:

9. Viewing Analysis Data After Finalisation

• To access Holter analysis data after a report has been finalised, click View Raw Data from the ellipsis (⋯) menu in the Report View.
• This will open the procedure in the Analysis Tool for review.

10. Requesting Full Disclosure

• If a Full Disclosure Report is needed, click Request Full Disclosure Report from the ellipsis (⋯) menu in the Report View.
• The request will be processed, and the full disclosure report will be made available once generated.

Important Note: The Full Disclosure Report feature is available only when enabled in your account settings. To have this feature activated, please reach out to your account manager.