Skip to main content
English (US)

Search

Articles in this section

How do I use Web Enrolment for myPatch?

To use Web Enrolment first we need to ensure that the following conditions are met:

  • "Web enrolment" setting must be turned on at the Facility where you are trying to Enrol
  • The browser in use must support the required functionality, e.g Chrome or Edge 
    • If browser does not support the functionality required, users will be redirected to use Desktop application to complete the process

When you try to enrol a patient on the device, you will be asked to select your method of enrolment. 

Please select "Web enrolment" and follow the steps listed below to complete the process.


1. Select "STM32 Virtual ComPort in FS Mode" in the pop up as shown below and click CONNECT.

Note: You only need to do this the first time you connect to the device or till the browser settings are reset, if permission is already granted you will not see this message

mceclip0.png


2. Select the file location of the myPatch device on your PC and click SELECT FOLDERmceclip1.png


3. Grant access to allow BeatBox to read from the selected location, by clicking VIEW FILES.

Note: You only need to do this once per browser session, if permission is already granted you will not see this message

mceclip2.png


4. Confirm the details of the myPatch enrolment are correct


mceclip3.png


5. Click Enrol on device to complete the enrolment process
6. Grant access to allow BeatBox to write to the selected file location, by clicking SAVE CHANGES.

Note: You only need to do this once per browser session, if permission is already granted you will not see this message

mceclip4.png


7. You will see a success message

The patient is enrolled on the Holter device. The procedure's status is now 'Enrolled on device' and an 'Enrolled' tag is attached to the procedure.

Related articles